| Frequency Range |
20 KHz to 1GHz |
| Voltage Range |
1mV to 3VFs, Selectable |
| Display |
digital Meter |
| Resolution |
0.5 dBm db scale -0.5dBm Mv scale -2%of FS measured in top black scale 3.3% of FS measured in bottom blackScale |
| Range Selection |
Auto or Manual |
| Voltage Accuracy(< 1Vrms input) with Tee adaptor And 50 ohms load |
Basic Accuracy + (-) Frequency response |
| Basic Accuracy |
+ (-) 2% FS at 25 Deg .CAt 100 MHz |
| Frequency Response |
+ (-) 2%FS (200 KHz to 200 MHz)
+ (-) 5%FS (50 KHz to 500MHz)
+ (-) 11% FS (20 KHz to 1GHz) |
| Temperature Coefficient |
+ (-) 0.2% FS per Deg. C |
| Crest Factor |
4.2 to 1.4 |
| Input Impedance |
>100Kohms in parallel with 2.5 pf (typical)
|
| Logarithmic Range |
: +10 to -30 dBm. 50 Ohms in a single four Decade dB scale |
| Pen Recorder Output |
Available from rear panel programme socket FS Equal 1V nominal Output Impedance 2 Kohms |
| Remote Programming |
Range Selected by BCD code TTL levels. Negative logic.
|
| |
| General |
| Power Requirement |
: 230V AC + (-) 10% |
| Frequency |
50Hz + (-) 10% |
| External DC |
+ (-) 15V to + (-) 30 V, 200mA via rear panel Connector
|
| Operative Temperature |
0 to 55 0 C |
| Dimensions (Approx.) |
(H*W*D)
95*235*275mm |
| Weight (Approx.) |
3.3 Kg. |
| Accessories (supplied) |
50Ohms Tee Connector and 50 Ohms Termination, Mains lead Probe earthing Clip, Operating Manual. |
| |
|
